Cooling Fan Kit, 50mm Monster Blower Motor for TRA E-Revo 2 - Hot Racing

About this part

Monster Blower clip-on heat sink and fan from Hot Racing. It pushes air straight across the motor fins to keep the can cool, whether it's going on an E-Maxx, an E-Revo 2.0 or your own build.

Features

• Forced airflow over the motor heat sink for better cooling, efficiency and performance
• Big 50x50x10.3mm 7-blade fan
• Clips on for a quick install
• Black and blue anodized aluminum heat sink moves heat out fast
• TRA-style adapter and 24AWG silicone wire
• IN THE BOX:
• One (1) clip-on heat sink with fan
• One (1) TRA-style adapter connector
• BEFORE YOU BOLT IT:
• Loosen the fan screws during install, then tighten them back down. This keeps the fan from getting tweaked or bound up.
• Put medium strength blue thread lock on the fan mount screws
• Make sure the fan blades are protected
• This system runs a TRA-style connector. Any other plug means swapping connectors or running an adapter.
• SPECS:
• Fan size: 50x50x10.3mm
• Input voltage: 11.1V (12V max)
• Fits motors with a 1.6 inch (40mm) can diameter
• REPLACES:
• Hot Racing 50x50x10.3mm fan MH505F or MH505F8

Fits