True-Track Rear A-Arm Conversion, Black for Revo - RPM R/C Products

About this part

True-Track rear A-arm conversion in black for all Revo versions. It kills the stock rear toe links and locks the rear toe in place. No more rear bump steer, so the back end tracks straight no matter the terrain.

Features

• Locks rear toe at 1.5 per side for 3 total rear toe-in
• Eliminates rear bump steer
• Replaces the lower pivot ball with a 4mm hinge pin for constant rear toe
• Keeps the stock upper pivot ball so you can still adjust camber
• Weighs 1-1/8oz (32g) less than stock

You will receive

• Two each upper and lower rear A-arms
• Two axle carriers
• Two 4mm hinge pins
• Four E-clips
• Two 3x16mm shock mount screws
• Two aluminum pivot ball set screws
• Two Delrin pivot ball bushing cups
• Two 6x15mm sealed outer bearings
• Two 12x21mm sealed inner bearings
• Instruction sheet

Requirements

• Removal of stock rear components

Comments

• Compatible with RPMC8237, RPMC8238, RPMC8222, and RPMC8585. Not compatible with TRA #5356 Long Travel Rocker Set.
• FITS:
• Traxxas E-Revo 5603 5605 5608, Traxxas Revo 2.5, Traxxas Revo 3.3 5308 (2008 models), Traxxas Revo 3.3 5309, Traxxas Summit

Fits