1/14 Motorized Support Legs for 1/14 Semi - Tamiya

About this part

This is a Great Hop-Up to add Realism to your Tamiya King Hauler kit.

You will receive

• Two AA battery cases
• One RS-29 motor
• Two battery case connectors (these are used to connect the 2 battery
• Cases)
• One battery terminal A
• One battery terminal B
• One tube of silicone grease (oz for the gears)
• One coupler plate A
• One servo plate
• One switch plate
• One worm gear (acts kind of like a pinion)
• One 28 teeth / 12 teeth counter gear
• One 36 teeth / 10 teeth counter gear
• One 40 tooth gear
• Two return springs
• One inner spring
• Four rack springs
• One 2x67mm threaded shaft
• One 2x50mm threaded shaft
• One " x 4" double sided tape
• One 20x20mm double sided tape
• One shift gate (used on the transmitter as a guide)
• Three nylon adjusters (aka 4mm ball cups)
• One 5x40mm rubber tubing
• One 4-way wrench
• Two metal racks
• Two joint cups
• Two metal rack pinion
• Two pinion shaft
• Two 5mm washers
• Two 5x8mm bronze bushings
• Two 3x7mm bronze bushings
• One drive shaft
• One brass hex hub
• One hex wrench
• One brass rod nut
• One ON/OFF switch
• Two coupler nuts
• Two 4mm ball connectors
• Two 4mm e-ring
• Four spring pins
• Four 3x3mm grub screw (aka hex screw)
• Two 2mm e-rings
• Two 2mm washers
• Five 2.5x8mm socket head cap screws
• Nine 2x8mm scre

Fits