Setting Solution, Micro Sol, 1 Oz - Microscale Industries

About this part

Micro Sol is built for the nastiest irregular surfaces on a model. It fully softens the decal so it drapes over bumps and curves without distortion, and it makes the decal part of the paint itself. Use it short: coat for a few seconds, then walk away. Leave it alone until dry, because the decal stays soft and gets damaged easily. PREP AND APPLY: 1. Brush Micro Sol on first to prep the surface and boost the adhesive. 2. Make sure the surface is free of particles that could slide under the film and leave a blemish. 3. When the decal won't move easily anymore, brush on Micro Sol with a small flat brush using as few strokes as possible. 4. Let it dry without touching it. One coat is usually enough. A second can help if needed. SPECS: 1 oz bottle FITS: Airsoft, HO scale trains, model rockets, Pinewood Derby, plastic models, project kits

Fits