Aluminum 62mm Threaded Shocks (2), Assembled for Dromida 1/18 - Hot Racing

About this part

Hot Racing's optional hop-up pair of 62mm aluminum threaded shocks for multiple 1/18 Dromida rigs. CNC machined aluminum bodies, caps, collars, lower seal caps, shock ends and spring retainers/cups. Hardened steel shafts. Threaded bodies and collars for easy ride height and preload tuning. Integrated bladder, vented caps and versatile two-hole pistons. Two spring options: silver (stiffer) and black (softer). Anodized silver and orange. Pre-assembled to cut your downtime.

You will receive

• Two 62mm (2.44 inch) pre-assembled shocks
• Two silver springs
• Two black springs
• Mounting hardware: four screws, four o-rings, two shock end bushings, two shock cap bushings, two aluminum spacers, four washers

Requirements

• Silicone shock oil of your choice.

Comments

• Rebuild kit is Hot Racing RDMD62DA.
• Replaces the stock Dromida plastic DIDC1016 shocks.
• Known to fit at least: Wasteland Buggy 4WD RTR, Wasteland Truck 4WD RTR, BX4.18 Buggy 4WD RTR, BX4.18BL Buggy brushless 4WD RTR, DB4.18 Desert Buggy 4WD RTR.

Fits